Plywood characteristics and environmental protection Many people know that plywood is a thin sheet, it is made of many layers of thin veneer using glue, but this plate in the furniture market occupies a certain position advantage, then why plywood furniture is so popular, plywood manufacturers let us see why.

04

In fact, plywood is a kind of wood-based board, the use of different wood processing molding, not only the price is relatively low, compared with solid wood furniture has certain advantages in price, so this is also the reason why many consumers choose plywood furniture.

Although the material is the use of wood processing, but together with plywood is also a very environmentally friendly material, especially in this era of the trend is very consistent, so many families are to buy this furniture, and plywood has outstanding heat resistance, weather resistance and durability characteristics, so this characteristic relative to plywood is to increase its advantages. It also strengthened its popularity in people's hearts.

Plywood is a three-layer or multi-layer plate-like material made of wood segments cut into veneer or thin wood cut by wood square planing, plywood and then glued with adhesive, generally with odd layers of veneer, and the fiber direction of adjacent layers of veneer is vertically glued to each other.

Plywood is one of the commonly used materials for furniture, one of the three wood-based panels, can also be used for aircraft, ships, trains, cars, construction and packaging boxes and other materials, a group of veneers generally according to the direction of adjacent layers of wood grain each other vertical group of billets glued together, generally the table board and the inner board is equipped in the center layer or the two ends of the board core.

After gluing the veneer according to the direction of the wood grain into the slab, under the heating or not heating constraints, the number of layers is generally odd, a small number of even, the vertical and horizontal direction of the physical, mechanical properties of the difference is small, commonly used plywood types are plywood, plywood, etc., plywood can advance wood utilization, is a primary way to save wood.

Plywood is made of wood segments cut into veneer or by wood square planing into thin wood, and then glued with adhesive made of three or more layers of plate data, usually with odd layers of veneer, and the adjacent layer of veneer fiber direction plywood manufacturers straight glued to each other, plywood can advance wood utilization, is a primary way to save wood, can also be used for aircraft, ships, trains, cars, Construction and packaging boxes and other materials, plywood manufacturers the following overview of all pre-assembled column formwork equipment construction points:

Before hoisting, check the section standard of the upper and lower ends of all pre-assembled column formwork, the number and tightening degree of diagonal faults  connecting parts, clamping parts, column hoop, check whether the column bars hinder the set of the column mold and tie the column top bars together with lead wire  to facilitate the column mold to be inserted from the top.

When all the column mold equipment is on the datum plane, after the line is taken under the template, the four diagonal braces or cable wind rope with flower basket bolts are connected to the top four corners of the column, and the other end is anchored to the ground. Check its center line, column side line, and column mold barrel body after twisting and straight, the support is fixed. When the column height exceeds 6m, it is not appropriate to support a single support and several columns are supported together to form a frame.

When the beam-column template is set up twice, the top layer of the template should be kept intact to facilitate the connection of the secondary support beam-column template and the connection is smooth.

With the continuous improvement of the material life of plywood manufacturers, which makes people's knowledge of environmental protection is also constantly enhanced, for the requirements of continuing to open, let us improve the utilization rate of resources, so plywood manufacturers are non-toxic, pollution-free, can be fully used, colorful plywood materials are also valued by people, so that the corresponding market in the beginning of continuous open, strong.

Plywood is a three-layer or multi-layer sheathing material made of wood segments cut into veneer or thin wood by wood planing, and then glued with adhesive, generally with odd layers of veneer, and the fiber direction of the adjacent layer of veneer is vertically glued together, plywood factory uses a lot of waste wood to produce plywood that is popular with people, and plywood can be reused. Make its use function more environmentally friendly.

Generally different plywood with its thickness specifications, generally divided into 3 cm board, 5 cm board, 9 cm board, 12 cm board, 15 cm board and 18 cm board six specifications (1 cm is 1 mm), the benefits: strength, good bending function, in some structural parts that require load-bearing, the use of fine core board will be more strong.